According to CRI, the consumer scale of the take-out food industry has kept a relatively rapid expanding tendency, Increasing from 80 million at the end of 2012 to about 300 million at the end of 2017. Although the growth rate of take-out consumers has tended to decelerate since 2017, this rate is still likely to rise again with take-out food platforms accelerating development in third-tier and fourth-tier cities as well as in rural areas in China.
CRI’s market research reveals that the consumption volume of take-out meal boxes has exceeded 10 billion units in China in 2017. In China, a take-out meal box is a kind of disposable tableware, which is a type of consumptive and cheap tableware just for single use. Take-out meal boxes can be made of paper, wood, plastics, metal, etc. They are primarily applied to packed take-out food. Despite being accepted by the society and widely used by people for convenience, environmental pollution may be caused once these take-out meal boxes are discarded. According to market research by CRI, PP (poly propylene) boxes are most widely used in present Chinese market, followed by paper boxes and degradable boxes.

Global Smart and Intelligent Packaging Market to Surge at 7.89% CAGR, which is anticipated to reach USD 30.5 billion by 2030.

Since take-out food platforms do not provide merchants with take-out meal boxes, merchants need to purchase boxes on their own. According to CRI, disposable boxes are generally priced at CNY 0.3-1.5 per unit in China, among which degradable boxes are priced the highest, representing a relatively low market share.

CRI analyzes that low barriers to entry in China’s disposable meal box industry lead to a great number of manufacturers, a majority of whom are small enterprises. Some enterprises use hazardous materials such as medical waste as raw materials of disposable boxes in order to save costs, which has a negative impact on industry reputation. On November 2, 2017, China National Development and Reform Commission declared that it would cooperate with relevant authorities to adjust “ban on free plastic bags” and to formulate a series of implementation plans related to use of non-degradable plastic bags in the take-out food industry. It is estimated that with Chinese government issuing stricter policies in fields such as environmental protection and food safety, a part of unqualified disposable meal box manufacturers will close down, continuously improving the concentration rate of China’s take-out meal box manufacturing industry.

CRI predicts that China’s take-out food industry will continue to develop during 2018 and 2022 and the CAGR of the consumption volume of take-out meal boxes will reach at least 15%. For disposable meal box manufacturers, especially for degradable meal box manufacturers, plenty of opportunities can be found in Chinese market in the next few years.

Readers can obtain the following information or more through this report:
– Development Status of Catering Industry in China
– Economic and Social Environment of Take-out Meal Box Industry in China
– Supply and Demand Status of Take-out Meal Boxes in China
– Price Trend of Take-out Meal Boxes
– Major Take-out Meal Box Manufacturers in China
– Competition in Take-out Meal Box Industry
– Driving Forces and Market Opportunities in Take-out Meal Box Industry in China, 2018-2022
– Risks and Challenges Faced by Take-out Meal Box Industry in China, 2018-2022
– Forecast on Development Trend of Take-out Meal Box Industry in China, 2018-2022

Table of Contents
1 Basic Concept of Take-out Meal Box
1.1 Definition
1.1.1 Definition of Take-out Food
1.1.2 Definition of Take-out Meal Box
1.2 Classification of Take-out Meal Boxes
1.2.1 Disposable Foamed Plastic Meal Box
1.2.2 PP Plastic Meal Box
1.2.3 Paperboard Meal Box
1.2.4 Starch Meal Box
1.2.5 Molded Pulp Meal Box
1.2.6 Degradable Plastic Meal Box
1.2.7 Full Biodegradable Meal Box
1.3 Development of Disposable Take-out Meal Boxes
1.4 Analysis on Take-out Meal Box Industry Chain
1.4.1 Upstream Raw Materials
1.4.2 Midstream
1.4.3 Downstream Clients
1.5 Research Methods of the Report
1.5.1 Data Sources
1.5.2 Parameters and Assumptions
1.5.3 About CRI

2 Development Environment of Take-out Meal Box Industry in China, 2018-2022
2.1 Economic Environment
2.2 Policy Environment of Take-out Meal Box Industry in China
2.3 Development Status of Internet Industry in China
2.4 Development Status of Fast Food Industry in China, 2018-2022
2.5 Barriers to Entry of Take-out Meal Box Industry in China
2.6 Competition Structure of Take-out Meal Box Industry in China
2.6.1 Analysis on Bargaining Power of Upstream Raw Material Suppliers
2.6.2 Analysis on Bargaining Power of Downstream Clients
2.6.3 Competition inner the Industry
2.6.4 Threats of Potential Entrants
2.6.5 Threats of Substitutes

3 Development Status of Take-out Food Industry in China
3.1 Structure of Take-out Food Industry in China
3.1.1 Dynamics of Take-out Food Market in China
3.1.2 Competition Structure of Take-out Food Industry in China, 2017-2018
3.2 Supply Scale of Take-out Food Industry in China
3.2.1 Supply Status of Take-out Food Platforms in China
3.2.2 Status of Take-out Food Merchants in China
3.3 Size of Take-out Food Market in China
3.4 Consumer Scale of Take-out Food Industry in China

4 Overview of Take-out Meal Box Market in China, 2012-2017
4.1 Demand for Take-out Meal Boxes in China
4.2 Analysis on Market Size of Take-out Meal Boxes in China
4.3 Analysis on Impact of Take-out Meal Boxes on Environment in China
4.4 Analysis on Recycling Status of Take-out Meal Boxes in China

5 Analysis on Development Trend of Related Industries of Take-out Meal Boxes in China, 2018-2022
5.1 Development Trend of Take-out Food Industry in China, 2018-2022
5.2 Development Trend of Disposable Tableware Manufacturing Industry in China
5.3 Development Trend of Waste Treatment Industry in China

6 Forecast on Development of Take-out Meal Box Industry in China, 2018-2022
6.1 Factors Influencing Development of Take-out Meal Box Industry in China
6.1.1 Driving Forces and Market Opportunities in Take-out Meal Box Industry in China
6.1.2 Risks and Challenges Faced by Take-out Meal Box Industry in China
6.2 Forecast on Demand of Take-out Food Industry in China, 2018-2022
6.2.1 Forecast on Size of Take-out Food Industry in China, 2018-2022
6.2.2 Forecast on Consumer Scale of Take-out Food Industry in China, 2018-2022
6.3 Forecast on Demand of Take-out Meal Box Industry in China, 2018-2022
6.3.1 Forecast on Consumption Volume of Take-out Meal Boxes in China
6.3.2 Forecast on Market Size of Take-out Meal Boxes
6.4 Solutions to Environmental Protection of Take-out Meal Boxes

7 Introduction of Major Disposable Meal Box Manufacturers in China, 2016-2018
7.1 Guangdong G-Box Holdings Co., Ltd.
7.2 Shanghai Elements Packaging Co., Ltd.
7.3 Shenzhen Idprint S&T Co., Ltd.
7.4 Shousheng Grocery Trading Company
7.5 Aiwang Plastics Co., Ltd.
7.6 Other Enterprises

Selected Charts
Chart Average Price of Disposable Meal Boxes in China, 2017
Chart China’s GDP, 2013-2017
Chart Disposable Income Per Capita in China, 2013-2017
Chart Total Retail Sales of Consumer Goods in China, 2013- 2017
Chart Disposable Income and Consumption Expenditure Per Capita in China, 2013-2017
Chart Relevant Policies in Disposable Meal Box Manufacturing Industry in China
Chart Quantity of Mobile Network Subscribers in China, 2012-2017
Chart Operating Revenue of Fast Food Industry in China
Chart Market Share of Third-Party Take-out Food Platforms, 2016
Chart Introduction of Major Take-out Food Platforms in China
Chart Coverage Rate of Take-out Food Merchants in Cities at Different Levels in China
Chart Size of Take-out Food Market in China, 2013-2017
Chart Consumer Scale of Take-out Food Market in China, 2012-2017
Chart Consumption Volume of Take-out Meal Boxes in China, 2012-2017
Chart Market Size of Take-out Meal Boxes in China, 2012-2017
Chart Average Price of Take-out Orders from Online Subscribers in China
Chart Consumption Frequency of Subscribers on Take-out Food Platforms in China
Chart Forecast on Size of Take-out Food Market in China, 2018-2022
Chart Forecast on Consumer Quantity in Take-out Food Market in China, 2018-2022
Chart Forecast on Consumption Volume of Take-out Meal Boxes in China, 2018-2022
Chart Forecast on Market Size of Take-out Meal Boxes in China, 2018-2022

Commercial Water Heaters Market Outlook 2030: Industry Insights & Opportunity Evaluation, 2019-2030

The post Research Report on Take-out Meal Box Industry in China, 2018-2022 first appeared on CRI Report.

China’s tire export dates back to 1952. In the early days, exported categories were mainly truck tires, light truck tires and agricultural tires with diagonal patterns. Now, there are over 1,000 varieties of 5 major series, namely, truck tires, light truck tires, sedan tires, engineering industrial tires and agricultural tires with diagonal and radial patterns. Export destinations have expanded from Southeast Asia, Middle East and Africa to developed countries and regions such as North America and Europe. China has become the world’s largest manufacturer, exporter and consumer of tires. However, up to 1/3 of its tires depend on import.

China has a complete tire industry mechanism. Except for natural rubber which mainly relies on import, other materials involved in the industry, including synthetic rubber and additives such as carbon black and zinc oxide can be produced by many manufacturers in China. Chinese manufacturers are also good at producing carcass materials such as steel wire, and rubber machinery such as mixer, calender, molding machine and vaulcanizer (mold).

In 2016, China’s tire export reached CNY 468.48 million, increasing by 5.4% YOY. Export value was USD 12.89 billion, decreasing by 6.9% YOY. Average unit export price was USD 27.52, decreasing by 11.65% YOY. Affected by the decreasing price of natural rubber on the international market in recent years, the manufacturing cost of tires has been declining, so the average unit export price of tire has been declining as well.

In 2016, tires from China were exported to more than 200 countries and regions with the U.S.A. being the largest market. The value of tires exported from China to the U.S.A. was USD 2,102 million, accounting for 16.3% of China’s total export value of tires in the same term.

The U.K. was the second largest market. In 2016, the value of tires exported from China to the U.K. was USD 541 million, accounting for 4.2% of China’s total export value of tires in the same term.

Mexico, Australia, the UAE and Germany were also important export destinations of tires from China.

Tires exported to the U.S.A. were mainly radial tires for passenger vehicles between 15 and 16 inches. China’s export price of tires of that size is 80% of the average export price, still lower than the prices of other countries. Tires imported from China ranked the first in terms of all sizes of imported tires for passenger vehicles in the U.S.A.

Since China joined the WTO, the rapid growth of tire export has resulted in more trade barriers, posing severe challenges to manufacturers and exporters in China. For one thing, the U.S. and European countries have set stricter technology standards for imported tires. Meanwhile, the increasing market share of tires exported from China harms the benefits of some tire manufacturers. A price war breaks out among Chinese tire exporters. The structures of exported tire products and the market are improper. These all lead to serious problems faced by Chinese tire exporters. China’s large scale of tire export has triggered several countries to undertake sanction measures such as anti-dumping.

In 2017, China’s tire export will remain dim. This is mainly due to the slowing growth of the global economy and the increasing international trade barriers. For another, China’s is faced with heavy inflation pressure, bringing up the cost in the tire industry and consequently reducing the competitiveness of Chinese exports.

China’s tire export is also affected by trade conflicts. Take tires for passenger vehicles as an example. In 2011, the value of tire export to the U.S.A. dropped sharply to USD 968 million due to the tariff imposed on Chinese tires. It takes three consecutive years for China’s tire export to the U.S.A. to quickly rebound.

In 2016, production and sales of automobiles grew rapidly and automobile reserves in China kept increasing, making Chinese tire enterprises to focus more on domestic market. They must adjust export structure, improve technology and increase added value of exported products. At the same time, they should create more comparative advantages and adopt more effective measures to encourage export.

Overall, China’s position in the global tire market is irreplaceable and will remain in the first place in the short run given its advantages in industry chain and costs.

Readers can obtain the following information or more through this report:

-Government Policies on Tire Export in China

-Export of Tires in China

-Major Export Destinations of Tires from China

-Trade Barriers against Tires Exported from China

-Forecast on Tire Export in China

Table of Contents

1 Overview of Tire Industry in China

1.1Definition and Classification

1.1.1 Definition

1.1.2 Classification

1.2 Status Quo of Tire Industry in China

1.2.1 Supply of Tire Industry in China

1.2.2 Demand of Tire Industry in China

1.3 Tire Industry Chain in China

1.3.1 Tire Mold

1.3.2 Carbon Black

1.3.3 Natural Rubber and Synthetic Rubber

1.3.4 Steel Cord

1.3.5 Automobile Industry

2 Export of Tires in China, 2011-2016

2.1 Overall Export of Tires from China

2.1.1 Export Volume

2.1.2 Export Value

2.2 Product Structure of Exported Tires from China, 2014-2016

2.3 Major Export Destinations of Tires from China, 2014-2016

2.3.1 Overview of Export Destinations

2.3.2 Export Segments

3 Factors Influencing Tire Export in China, 2017-2021

3.1 Favorable Factors of Tire Export

3.2 Unfavorable Factors of Tire Export

3.3 Forecast on International Trade Barriers

4 Major Export Markets of Tires from China, 2011-2016

4.1 The U.S.A.

4.1.1 Production of Tires

4.1.2 Consumption of Tires

4.1.3 Import of Tires

4.1.4 Trade Barriers against Tires from China

4.2 The U.K.

4.3 Mexico

4.4 Australia

4.5 The UAE

4.6 Saudi Arabia

4.7 Germany

4.8 Canada

4.9 The Netherlands

4.10 Italy

5 Prospect of Tire Export in China, 2017-2021

5.1 Factors Influencing Export

5.1.1 Favorable Factors

5.1.2 Unfavorable Factors

5.2 Forecast on Export Volume

5.3 Development Recommendations

Table of Charts

Chart Classification of Tire Products

Chart Production Volume of Tires in China, 2006-2016

Chart Market Size of China Tire Industry, 2006-2016

Chart Export Volume of Tires in China, 2006-2016

Chart Export Volume of Radial Tires in China, 2006-2016

Chart International Trade Barriers against Tire Export from China, 2006-2016

Chart Export of Tires from China to the U.S.A., 2011-2016

Chart Export Value of Tires in China, 2011-2016

Chart Top 20 Export Destinations of Tires from China, 2016

Chart Forecast on Export Volume of Tires in China, 2017-2021

The post Research Report on Tire Export in China, 2017-2021 first appeared on CRI Report.

Research by CRI suggests that the sales volume of MMR vaccines exhibited a fluctuating trend in China between 2013 and 2017.

Measles, mumps and rubella are acute respiratory infectious diseases caused by viruses, all of which can be spread through droplets coming from respiratory tracts. Children and teenagers are high risk groups of diseases. Breakout of epidemics among groups will not only result in harms to their health but also have a direct impact on normal teaching orders and even cause social panics.

Measles has the highest incidence rate and mortality rate, posing extremely huge threats to children’s health. People infected with measles usually have clinic manifestations like fever, rashes and cold.

Although rubella and mumps exhibit slight clinic symptoms and favorable prognosis, mumps sometimes brings about serious complications, such as boys with secondary orchitis and girls with secondary ovaritis, further leading to sterility and infertility when they grow up. If women are infected with measles at the early stage of pregnancy, there is a possibility of abortion and fetal malformation.

CRI analyzes that despite reduced incidence rates of measles, rubella and mumps in China in recent years, there is still a big gap between the actual incidence rate of measles and the targeted incidence rate set by WHO, which is required to be less than 1/ 1 million people.

In 2012, China’s incidence rate of measles was recorded the lowest, which was only 4.6/ 1 million people, but this rate has shown an uptrend since 2013. The incidence rates of rubella and mumps demonstrated an overall declining trend between 2012 and 2016.

According to CRI, there have been four mainstream vaccines related to measles, rubella and mumps in China by the end of 2017.

(1) Measles live attenuated vaccines: five enterprises hold production permits.

(2) Measles-mumps combined live attenuated vaccines: two enterprises hold production permits.

(3) Measles-rubella combined live attenuated vaccines: two enterprises hold production permits.

(4) Measles-mumps-rubella combined live attenuated vaccine (measles-mumps-rubella vaccine): two enterprises hold production permits.

In addition, imported measles-mumps-rubella vaccines produced by Glaxo SmithKline are launched into the Chinese market, namely Priorix. Although several enterprises possess production permits of MMR vaccines in China, a part of them have ceased production.

Research by CRI suggests that the sales volume of MMR vaccines exhibited a fluctuating trend in China between 2013 and 2017. This fluctuation is mainly attributed to factors such as government policies and market demand. In 2016, the sales volume of MMR vaccines exceeded 70 million.

The MMR vaccine is gradually taking up the market shares of other vaccines because of its good effect, preventing three types of infectious diseases.
Since 2008, the domestic MMR vaccine has been included in China’s planned immunization, and provided free for children of appropriate ages by the government.

This measure has promoted the development of the MMR vaccine industry in China. From a long-term perspective, MMR vaccines are expected to be the mainstream products, which will gradually substitute monovalent and combined vaccines.

CRI predicts a promising prospect of the MMR vaccine market since the loosing birth control policy is projected to contribute to an annual newborn population of 20 million or more in China during 2018 and 2022. It is estimated that the market shares of MMR vaccines will rise from 70% in 2017 to over 90% in 2022.

Readers can obtain the following information or more through this report:
– Government Policies of China MMR Vaccines
– Supply Status of MMR Vaccines in China
– Lot Release Status of MMR Vaccines
– Demand Status of MMR Vaccines in China
– MMR Vaccine Manufacturers in China
– Competition in China MMR Vaccine Industry
– Market Opportunities and Driving Forces of China MMR Vaccine Industry
– Risks and Challenges Faced by China MMR Vaccine Industry
– Prospect of China MMR Vaccine Market, 2018-2022

Investigation Report on China’s Shingles Vaccine Market 2021-2025

The post Research Report on China’s Measles, Mumps and Rubella (MMR) Vaccine Industry, 2018-2022 first appeared on CRI Report.

Polyvinyl chloride, PVC for short, is a kind of polymer of vinyl chloride monomer (VCM for short) after polymerization. PVC is widely used in production fields of soft products such as packing materials, artificial leathers and plastic products together with hard products such as profiled bars, tubing and slabs. The output volume of PVC is the largest among five general synthetic resins including PE, PP, PVC, PS and ABS.

In the 21st century, the growing PVC industry in China poses increasing influence on that of the globe. In recent years, China becomes the world’s leading PVC manufacturer and consumer. The output volume of PVC reached 16.10 million tons with a slight decline YOY in China in 2015.

Meanwhile, the aggregate consumption of two major PVC consumption fields including tubing and pipes together with profiles, doors and windows accounted for over 50% of the total. The tubing industry developed rapidly while the proportion of PVC tubing declined. The downstream demand declined with the development area of real estate, leading to declining output volume of the profile industry. In China, the profile industry is intense in enterprise competition and low in requirements on raw materials so calcium carbide method PVC is widely applied at present. In contrast, major downstream users of ethylene method PVC concentrated in high-end sheet materials especially in fields such as medical treatment, food packaging, electric and artificial leathers with relatively stable demand.

According to CRI,  as an energy-intensive industry, the sustainable development of the PVC industry is subjected to prices of energy and raw materials, the development of the chlor-alkali industry and petrochemical industry as well as environment protection policies in China. In recent years, the development and distribution of PVC manufacturers expanded to raw material concentrated areas, and the production capacity transferred from eastern regions with high costs to central and western regions with lower costs. With the increasingly mature production processes and local government support, the production capacity of PVC expanded rapidly from 2003 and experienced gradual saturation from 2005. The overcapacity deteriorated from 2008 with slump growth rate of production capacity. Under the promotion of “Government Investment Project of CNY 4 Trillion”, the new production capacity of PVC remained large from 2008 to 2012. According to CRI, the production capacity of PVC exceeded 25 million tons in China by the end of 2014. Chinese government implemented policies to phase out outdated capacity in 2015, leading to slight decline of PVC production capacity.

In the early 2015, the international crude oil dropped sharply, and PVC prices declined to the lowest compared to that of 2008 accordingly in China. The PVC market experienced rebound for three months from March to May in 2015. Up to the middle May, the average price of East China SG-5 rebounded to 5,920 CNY/ton increasing by 970 CNY/ton compared to the early 2015 due to the demand recovery, high prices of calcium carbide as major raw materials and declining supply of centralized maintenance of PVC enterprises. With the slump economic situation, demand and declining crude oil prices, PVC prices presented a trend of sharp decline from the middle May up to the end of 2015, breaking the record as the lowest for many consecutive years by average price.

The domestic PVC situation was closely related to the crude oil trend from 2016, and it started to rise with the recovery in economy and bulk commodity market in China.

The PVC industry is growing in the global position from the original pure importer to net exporter. Particularly, China implemented anti-dumping towards imported PVC from 2003, and calcium carbide method PVC developed rapidly. By the end of 2006, China became the world’s leading manufacturer of PVC surpassing the U.S.A. in terms of the production capacity and output volume. In recent years, the overall export volume of PVC experienced a steady rise in China. PVC transferred from a net import volume of 1 million tons in 2010 to a net export volume of 500,000 tons in 2015.

With the improvement in economy and urbanization, the demand for PVC is expected to rise continuously from 2017 to 2021 in China.

Through this report, readers can acquire the following information:

-Development Environment of PVC Industry in China

-Supply and Demand in China PVC Manufacturing Industry

-Import and Export of PVC in China

-Operation Status of Major PVC Manufacturers in China

-Market Competition of China PVC Industry

-Major Driving Forces and Market Opportunities in China PVC Industry

-Analysis on Price Trend of PVC in China

-Risks and Challenges Faced by China PVC Industry

-Forecast on Development of PVC Industry in China

Table of Contents

1 Basic Concepts of PVC

1.1 Definition and Classification of PVC

1.1.1 Definition of PVC

1.1.2 Classification of PVC

1.2 Analysis on Industry Chain of PVC

1.2.1 Upstream of PVC

1.2.2 Downstream of PVC

2 Development Environment of PVC Industry in China, 2011-2016

2.1 Economic Environment of PVC Industry in China

2.1.1 Chinese Economy

2.1.2 Global Economy

2.2 Policy Environment of PVC Industry in China

2.2.1 Major Policies for PVC Industry in China

2.2.2 Policy Trend of PVC Industry in China

2.3 Barriers to Entry in China PVC Industry

2.3.1 Policy Barriers

2.3.2 Economic Barriers

2.4 Competition Structure in China PVC Industry

2.4.1 Bargaining Ability of PVC Raw Material Suppliers

2.4.2 Bargaining Ability of Downstream PVC Clients

2.4.3 Competition in  China PVC Industry

2.4.4 Potential Entrants in China PVC Industry

2.4.5 Substitutes of PVC

3 Analysis on PVC Supply in China, 2011-2016

3.1 Analysis on Production Capacity of China PVC Industry

3.1.1 Overall Production Capacity of China PVC Industry

3.1.2 Production Capacity of PVC Industry in Major Production Areas

3.1.3 Production Capacity Structure of China PVC

3.1.4 Characteristics of New PVC Production Capacity in China, 2015-2016

3.2 Output Volume of PVC in China, 2011-2016

3.2.1 Analysis on PVC Output Volume in China

3.2.2 Analysis on Utilization Ratio of PVC Production Capacity in China

4 Analysis on Market Demand for PVC in China, 2011-2016

4.1 Analysis on Consumption in China PVC Market, 2011-2016

4.1.1 Application Areas of PVC in China

4.1.2 Apparent Consumption

4.1.3 Demand for PVC of Plastic Materials and Doors and Windows

4.1.4 Demand for PVC of Plastic Tubing

4.1.5 Demand for PVC in Other Fields

4.2 Analysis on PVC Prices in China, 2013-2016

4.2.1 Price Trend of PVC in China

4.2.2 Forecast on PVC Prices in China, 2017-2021

5 Import and Export Status of PVC in China, 2011-2016

5.1 Analysis on Import of PVC in China, 2011-2016

5.1.1 Import Overview of PVC in China

5.1.2 Major Import Sources of PVC

5.2 Analysis on Export of PVC in China, 2011-2016

5.2.1 Export Overview of PVC in China

5.2.2 Major Export Destinations

5.3 Import of Vinyl Raw Materials

6 Major PVC Manufacturers in China, 2013-2016

6.1 Xinjiang Zhongtai Chemical Co., Ltd.

6.2 Xinjiang Tianye Co., Ltd.

6.3 Shaanxi Beiyuan Chemical Co., Ltd.

6.4 Tianjin Dagu Chemical Co., Ltd.

6.5 China Petroleum & Chemical Corporation (Qilu Branch)

6.6 Shandong Xinfa Chemical Co., Ltd.

6.7 Haohua Yuhang Chemical Co., Ltd.

6.8 Inner Mongolia Elion Chemical Industry Co., Ltd.

6.9 Shanghai Chlor-Alkali Chemical Co., Ltd.

6.10 Henan Shenma Chlorine Alkali Development Co., Ltd.

7 Prediction on Development of PVC Industry in China, 2017-2021

7.1 Factors Influencing the Development of China PVC Industry

7.1.1 Major Driving Forces and Market Opportunities in China PVC Industry

7.1.2 Risks and Challenges in China PVC Industry

7.2 Prediction on Supply in China PVC Industry

7.3 Forecast on Demand in China PVC Market

Selected Charts

Chart Production Capacity of PVC in China, 2011-2016

Chart Production Capacity of PVC by Region in China, 2015

Chart Proportions of PVC with Different Technological Production Capacity in China, 2015

Chart Production Capacity Classification in China PVC Industry, 2015

Chart New Production Capacity Details of PVC in China, 2015-2016

Chart Output Volume of PVC in China, 2011-2016

Chart Price Trend of Calcium Carbide Method PVC in China, 2011-2016

Chart Price Trend of Ethylene Method PVC in China, 2011-2016

Chart Consumption of PVC in China, 2011-2016

Chart Import Volume and Value of PVC in China, 2011-2016

Chart Import Volume of VCM in China, 2011-2016

Chart Output Volume of PVC of Xinjiang Zhongtai Chemical Co., Ltd., 2011-2016

Chart Forecast on Output Volume of PVC in China, 2017-2021

Chart Forecast on Consumption Volume of PVC in China, 2017-2021

The post Research Report on China Polyvinyl Chloride (PVC) Industry, 2017-2021 first appeared on CRI Report.

In-vitro diagnostics is a diagnostic method through detecting samples (blood, body fluid, tissues, etc.) taken out from human bodies so as to judge diseases and organism functions. In most cases, the detection system composed of detection instruments and reagents are applied in in-vitro diagnostics.

In-vitro diagnostic reagents are used to carry out in-vitro detection on human samples. In Chinese market, there are mainly three categories including biochemical diagnostic reagents, immune diagnostic reagents and molecule diagnostic reagents.

The global in-vitro diagnostic market is mature and the concentration rate is high. Top 5 manufacturers of global in-vitro diagnostic industry are Roche, Siemens, JNJ, Abbott and Beckman with an aggregate market share of over 60% in the globe as monopolies. The market size of in-vitro diagnostics is closely related to the population base, medical treatment expenses per capita, medical care level and medical technology together with service levels of a country. At present, the demand market of global in-vitro diagnostics is mainly distributed in developed economies such as North America, Europe and Japan.

Meanwhile, emerging economies such as China, India and Brazil are increasing in medical care investment and medical treatment expenses per capita in recent years with large population base and high economic growth rate, leading to the pull for in-vitro diagnostic market demand.

The history of China in-vitro diagnostic industry is less than 40 years with a high growth rate, which is shorter than that of developed countries. The market size of China in-vitro diagnostic reagents reached about CNY 26 billion (USD 3.9 billion) in 2016, of which the leading three were immune, biochemical and molecular products. In terms of industry regulatory policies, laws and regulations together with industry policies concerning China in-vitro diagnostic industry are gradually consistent with international conventions. CFDA started to implement strict supervision on the IVD industry from 2014. A series of policies were issued to supervise various links including R&D, production, registration, clinics, circulation and sales, and large-scale shuffle was carried out on the IVD industry through strict industry access and operation requirements.

In China, major consumption demand for in-vitro diagnostic reagents derives from medical testing and blood screening. Medical testing is the major consumer of in-vitro diagnostic reagents including hospital clinical laboratory, physical examination center, independent laboratory and epidemic prevention station. Meanwhile, blood screening is mainly applied in blood collection and supply departments including various blood stations and blood product manufacturers. Presently, hospitals are major demand markets of in-vitro diagnostic reagents in China.

Before 2003, medium and high-end diagnostic products in China were monopolized by imports, but the improvement of domestic manufacturers’ production levels of detection reagents leads to the significant transfer of market pattern. In the primary market, the share of domestic reagents is increasing rapidly, while foreign enterprises still dominate the instrument market. Currently, Chinese domestic enterprises are gradually expanding from diagnostic reagents to instruments and occupying the market with advantages of instrument prices to promote the reagent sales.

According to CRI, China’s population accounts for more than 20% of the world, while the market share of in-vitro diagnostics is less than 10%. In 2016, the annual consumption per capita of China’s in-vitro diagnostic products was less than USD 3, while that of developed countries reached USD 25 to USD 30. Therefore, there is a wide increase space for China’s in-vitro diagnostic market. It is estimated that from 2017 to 2021, the market scale of China’s in-vitro diagnostic market will develop at a growth rate exceeding that of the average global level to about CNY 49 billion with the CAGR of over 10%. Meanwhile, major shares will be occupied by immune and biochemical products, and molecular products will grow with a higher proportion.

Through this report, readers can acquire the following information or even more:

-Status of Global and China In-vitro Diagnostic Reagents

-Governmental Policies Faced by China In-vitro Diagnostic Reagent Industry

-Status of Market Competition in In-vitro Diagnostic Reagent Industry

-Major In-vitro Diagnostic Reagent Manufacturers in Global and China Markets

-Major Driving Forces and Market Opportunities in China In-vitro Diagnostic Reagent Industry

-Risks and Challenges in China In-vitro Diagnostic Reagent Industry

-Prediction on Development of In-vitro Diagnostic Reagent Industry in China, 2017-2021

Table of Contents

1 Basic Concepts of In-vitro Diagnostic Reagent Industry

1.1 Definition of In-vitro Diagnostic Reagents

1.2 Classification of In-vitro Diagnostic Reagents

1.2.1 Classification by Detection Principles or Detection Methods

1.2.2 China-specific Classification Methods

1.3 Industry Chain of In-vitro Diagnostic Reagents

1.4 Research Methods of the Report

1.4.1 Parameters and Assumptions

1.4.2 Data Sources

1.5 About CRI

2 Analysis on Global In-vitro Diagnostic Industry, 2011-2016

2.1 Overview on Global In-vitro Diagnostic Reagent Industry

2.1.1 Development History

2.1.2 Competition Pattern

2.1.3 Market Scale of Global In-vitro Diagnostic Reagents

2.2 Analysis on Major Global Manufacturers of In-vitro Diagnostic Reagents

2.2.1 F. Hoffmann-La Roche Ltd

2.2.2 Siemens AG

2.2.3 Abbott Laboratories

2.2.4 JNJ

2.2.5 Beckman Coulter

3 Development Environment of China In-vitro Diagnostic Reagent Industry, 2011-2016

3.1 Economic Environment of In-vitro Diagnostic Reagent Industry

3.1.1 China Economy

3.1.2 Medical Industry in China

3.2 Policy Environment of In-vitro Diagnostic Reagent Industry

3.2.1 Competent Government Authorities

3.2.2 Policies on Enterprise Establishment

3.2.3 Policies on Production

3.2.4 Policies on Circulation

4 Operation Status of China Diagnostic Reagent Industry, 2011-2016

4.1 Development History of China In-vitro Diagnostic Reagent Industry

4.2 Supply Status of China In-vitro Diagnostic Reagent Industry

4.2.1 Major Manufacturers of China In-vitro Diagnostic Reagents

4.2.2 Supply Ability of China In-vitro Diagnostic Reagents

4.3 Market Demand for China In-vitro Diagnostic Reagents, 2011-2016

4.3.1 Overall Market Scale

4.3.2 Market Scale of Biochemical Diagnostic Reagents

4.3.3 Market Scale of Immune Diagnostic Reagents

4.3.4 Market Scale of Molecular Diagnostic Reagents

4.4 Analysis on Import and Export of In-vitro Diagnostic Reagents in China

4.5 Price Trend of Raw Materials of China In-vitro Diagnostic Reagents in China

4.5 Price Trend of In-vitro Diagnostic Reagents in China

5 Analysis on Competition in China In-vitro Diagnostic Reagent Industry, 2011-2016

5.1 Barriers to Entry in China In-vitro Diagnostic Reagent Industry

5.1.1 Policy Barriers

5.1.2 Technical Barriers

5.1.3 Sales Channel Barriers

5.2 Competition Structure of China In-vitro Diagnostic Reagent Industry

5.2.1 Bargaining Ability of Raw Material Suppliers of China In-vitro Diagnostic Reagent Industry

5.2.2 Bargaining Ability of Users in China In-vitro Diagnostic Reagent Industry

5.2.3 Internal Competition of China In-vitro Diagnostic Reagent Industry

5.2.4 Potential Entrants in China In-vitro Diagnostic Reagent Industry

5.2.5 Substitutes of In-vitro Diagnostic Reagents

6 Analysis on Major Manufacturers of In-vitro Diagnostic Reagents in China, 2013-2016

6.1 Shanghai Kehua Bio-engineering Co., Ltd.

6.2 Shenzhen Mindray Bio-medical Electronics Co., Ltd.

6.3 Sichuan Maccura Biotechnology Co., Ltd.

6.4 Shanghai Fosun Pharmaceutical Co., Ltd.

6.5 DAAN Gene Co., Ltd. of Sun Yat-sen University

6.6 Beijing Leadman Biochemistry Co., Ltd.

6.7 BioSino Bio-technology and Science Inc.

7 Prospect of China In-vitro Diagnostic Reagent Industry, 2017-2021

7.1 Factors Influencing the Development of In-vitro Diagnostic Reagent Industry in China

7.1.1 Major Driving Forces and Market Opportunities in China In-vitro Diagnostic Reagent Industry

7.1.2 Risks and Challenges in China In-vitro Diagnostic Reagent Industry

7.2 Forecast on Supply of China In-vitro Diagnostic Reagent Industry, 2017-2021

7.3 Forecast on Demand of China In-vitro Diagnostic Reagent Industry, 2017-2021

7.3.1 Forecast on Overall Market Scale

7.3.2 Forecast on Segment Market Scale

7.4 Forecast on Market Competition of In-vitro Diagnostic Reagent Industry in China

7.4.1 Forecast on Popular Products

7.4.2 Forecast on Competition Pattern

Selected Charts

Chart Sales Value of Major Global In-vitro Diagnostic Enterprises, 2015

Chart Market Scale of Global In-vitro Diagnostic Industry, 2011-2016

Chart Forecast on Market Scale of Global In-vitro Diagnostic Industry, 2017-2021

Chart Sales Value of In-vitro Diagnostic Products of Roche Diagnostics Department, 2011-2016

Chart Major In-vitro Diagnostic Reagent Products that Roche Sells in China

Chart Sales Value of In-vitro Diagnostic Products of Siemens Diagnostic Business Group, 2011-2016

Chart Sales Value of In-vitro Diagnostic Products of Abbott Diagnostics Department, 2011-2016

Chart Major Laws and Regulations of China’s In-vitro Diagnostic Reagent Industry

Chart Major Manufacturers of In-vitro Diagnostic Reagents in China

Chart Market Scale of In-vitro Diagnostic Reagents in China, 2011-2016

Chart Market Segmentation of China In-vitro Diagnostic Reagents, 2016

Chart Market Scale of China Biochemical In-vitro Diagnostic Reagents, 2011-2016

Chart Market Scale of China Immune In-vitro Diagnostic Reagents, 2011-2016

Chart Market Scale of China Molecular In-vitro Diagnostic Reagents, 2011-2016

Chart Major In-vitro Diagnostic Reagent Products of Shanghai Kehua Bio-engineering Co., Ltd.

Chart Sales Value of Diagnostic Reagent Products of Shanghai Kehua Bio-engineering Co., Ltd., 2011-2016

Chart Diagnostic Reagent Product Structure of Shanghai Kehua Bio-engineering Co., Ltd., 2015-2016

Chart Major In-vitro Diagnostic Reagent Products of Beijing Leadman Biochemistry Co., Ltd.

Chart Sales Value of Diagnostic Reagent Products of Beijing Leadman Biochemistry Co., Ltd., 2011-2016

Chart Forecast on Market Scale of China In-vitro Diagnostic Reagents, 2017-2021

Chart Forecast on Market Scale of China Biochemical In-vitro Diagnostic Reagents, 2017-2021

Chart Forecast on Market Scale of China Immune In-vitro Diagnostic Reagents, 2017-2021

The post Research Report on China In-vitro Diagnostic Reagent Industry, 2017-2021 first appeared on CRI Report.

With the development of Chinese economy, China papermaking industry recently maintained the momentum of rapid growth. The total output volume of paper and paperboard in China increased from 30.5 million tons in 2000 to 107.1 million tons in 2015 with CAGR reaching 8.7%.

Different sub-industries of China papermaking industry differ in degree of prosperity. With the rise of Internet in China, traditional print media such as newspaper, magazines and board books were on the wane with declining circulation, which led to the descending output volume of newsprint in China. With the increasing living standard of Chinese residents, the output volume of household paper keeps growing accordingly. The development of e-commerce in China brings about the increase of expressage, which promotes the increasing output volume of liner board and packaging paper in China.

It is difficult for the insufficient supply of fiber resources in China papermaking industry to satisfy the requirements of production capacity expansion. That is to say, fiber materials become the bottleneck restricting the development of China paper industry. In 2015, the consumption volume of wood pulp accounted for 28% of the total raw material consumption volume, and waste pulp accounted for 65%. The non-wood pulp only accounted for 7%. In recent years, the proportion of pulp and waste pulp kept increasing, while the proportion of non-wood pulp raw materials continued falling.

Waste paper plays an increasingly important role in supporting the development of China papermaking industry. The import volume of waste paper in China increased from 2.516 million tons in 1999 to 29.28 million tons in 2015 with CAGR reaching 16.6%. Supply and demand determine the price. With the rapid growth of demand, the price of imported waste paper also enjoyed a sharp increase. In 1999, the price of imported waste paper was 97 USD/ton, and it reached 180.3 USD/ton in 2015. China imported large quantities of waste paper and pulp to solve the shortage of raw materials. However, it led to over dependence on the imported raw materials of papermaking industry. Up to 2015, the imported pulp and the waste pulp converted by imported waste paper accounted for over 40% of the total raw materials.

Presently, there are many papermaking enterprises in China with low market concentration rate. Up to the end of 2015, there were 2,800 papermaking and paper product enterprises whose annual sales revenue exceeded CNY 20 million in China. On average, the annual output volume of one papermaking enterprise was less than 40,000 tons, and there was a large gap between China and the average level of international papermaking enterprises in developed countries. In 2015, there were less than 20 papermaking enterprises whose annual output volume exceeded 1 million tons in China.

The export volume of paper in China accounts for less than 3% of the total domestic output volume. In addition, in order to protect the environment and especially to ensure domestic supply, the export of paper is not encouraged by Chinese government. Unlike other industries, there are neither tax rebates for paper export nor subsidies for the paper industry in China.

Most of the world’s large-scale paper manufacturers accomplished the integration of forest, pulp and paper. However, most paper manufacturers in China failed to form their own forest-paper industry and thus high quality paper fiber depends greatly on import. The external impact on costs of raw materials directly led to unstable operation performance. Insufficient supply of fiber raw materials seriously hindered the development of paper industry in China. In the long run, the insufficient raw materials of papermaking in China will be a critical problem in the development of papermaking industry.

With the development of Chinese economy and e-commerce industry as well as the enhancement of residential living standard, the overall demand for paper products will keep the annual growth rate of 2% or more. Therefore, there exists certain investment opportunities in China papermaking industry.

Through this report, the readers can acquire the following information:

-Development Environment Faced by China Papermaking Industry

-Supply and Demand of China Papermaking Industry, 2011-2016

-Market Competition of China Papermaking Industry

-Import and Export Status of Paper Products in China, 2011-2016

-Key Enterprises in China Paper Industry and Their Operation Status

-Development Status of Forestry-Pulp-Paper Integration in China

-Price Trend of Raw Materials in China Papermaking Industry

-Major Driving Forces and Market Opportunities in China Papermaking Industry

-Threats and Challenges Faced by China Papermaking Industry

-Prediction on the Development of China Papermaking Industry, 2017-2021

The post Research Report on China Papermaking Industry, 2017-2021 first appeared on CRI Report.

The single-layer graphene is only as thick as 0.335nm like an atom, which is one of the thinnest known materials at present. The movement of electron is limited to a flat surface with only one layer of atom so graphene is characterized with new electrical properties. However, characteristics of graphene change sharply with the increase of layers.

In China, graphene materials are generic names of graphene with no more than 10 layers of carbon atoms and relevant derivatives. In contrast, graphene materials with more than 10 layers of carbon atoms generally belong to graphite for the loss of high graphene performance.

Graphene possesses excellent functions compared to various common materials. It is the hardest material known to human with good transmittance (almost completely transparent), high thermal conductivity coefficient (5300W/m•K), high electron mobility (1.5×104cm2/ Vs) and high mechanical strength. The application potential of graphene is large in various fields for its super performance. For example, it can be applied to transistors, sensors and super capacitors for high electron mobility.

It can also be used in the transparent conducting film with priority for its low light absorption rate. Market opportunities exist for graphene in fields such as flexible display and wearable devices with its excellent flexibility. It possesses huge application potential in electronic thermal material field with its strongest heat-conducting property. Meanwhile, graphene as additives can be applied to fields such as functional coating, plastics, rubber, sea water desalination and catalysts. Therefore, graphene is expected to be one of the advanced materials with the most positive application prospect in the future.

Graphene materials win the most impressive attention in the world from its emerging for unparalleled properties, and developed rapidly during the past 12 years from 2004. The discoverer of graphene won the Nobel Prize for physics in 2010, from when researches and industrialization related to graphene grew rapidly.

Many countries including Europe, the U.S.A. and Japan issued a series of policies supporting the development of the graphene industry. Transnational companies pay attention to the graphene market for the promotion of R&D together with application of graphene such as Dow Chemical Company, Samsung, IBM, General Motors, Xerox, Bayer and BASF.

The graphene industry started due to the cost reduction and expanded downstream application in China. In recent years, the production costs decreased to 10% in 2016 of that in 2011 with the improvement of graphene processing technics. Graphene realizes the industrialized application in multiple fields such as energy storage materials, sensors, touch devices, conductive ink pastes and composite materials and is ready for mass volume. Meanwhile, graphene is sold for profits in some products of multiple front applications to be broke through such as lithium batteries conductive paste, heat conduction film, composite materials and flexible displays.

According to market researches of CRI, graphene manufacturers are generally medium and small scale enterprises mainly at the downstream of the industry chain. Meanwhile, the market is at its infancy while the development is rapid. Graphene enterprises released some products in fields such as touch screens, graphene lithium ion batteries and functional coatings to promote the development of this industry.

For example, mass production of graphene is achieved in energy storage material fields including conductive agents and flexible displays. Meanwhile, graphene conductive agents are mainly applied in 3C and power battery field for higher charging speed of lithium iron phosphate battery. Large-scale application of graphene films developed by 2D Carbon is achieved in flexible touch screens with the sales revenue of more than CNY 10 million in 2015.

From 2014, Chinese government continuously issued supporting policies concerning graphene. It issued The Upgrading Engineering of Key Materials in November 2014 stipulating to realize stable batch production and large-scale application of graphene by 2016. According to the plan of Made in China 2025, the market size of the graphene industry will exceed CNY 10 billion by 2020 and exceed CNY 100 billion by 2025.

In November 2015, Chinese government issued Opinions on Promoting the Innovative Development of Graphene Industry to promote the development of graphene in various fields. Meanwhile, China’s Ministry of Industry Raw Material Industrial Division put forward suggestions on promoting the industry development. It is estimated that more supporting policies concerning the graphene industry will be issued by Chinese government in 2017. Major forms may include the establishment of industrial support funds and the implementation of preferential taxes.

CRI estimates that the CAGR of the graphene market size will reach 300% to 500% from 2017 to 2021.

Through this report, readers can acquire the following information:

-Support Polices of Chinese Government on the Graphene Industry

-Major Manufacturing Methods of Graphene in China

-Forecast on Supply and Demand in China Graphene Industry

-Major Downstream Application of Graphene Industry

-Major Manufacturers of Graphene in China, 2013-2016

-Competition Status of Graphene Industry in China

-Major Driving Forces and Market Opportunities in China Graphene Industry

-Risks and Challenges in China Graphene Industry

-Development Trend of China Graphene Industry, 2017-2021

Table of Contents

1 Concept of Graphene

1.1 Definition and Classification of Graphene

1.1.1 Definition of Graphene

1.1.2 Classification of Graphene

1.2 Research Methods of the Report

1.2.1 Parameters and Assumptions

1.2.2 Data Sources

1.2.3 About CRI

2 Analysis on Graphene Industry in China, 2012-2016

2.1 Development Environment of Graphene Industry in China

2.1.1 Economic Environment of Graphene Industry in China

2.1.2 Policy Environment of Graphene Industry in China

2.2 Analysis on Supply of China Graphene Industry

2.2.1 Major Graphene Manufacturers in China

2.2.2 Production Capacity and Output Volume of Graphene in China

2.3 Market Demand for Graphene in China

2.3.1 Downstream Application of Graphene in China

2.3.2 Market Size of Graphene in China

3 Analysis on Competition Status of China Graphene Industry, 2013-2016

3.1 Barriers to Entry in China Graphene Industry

3.1.1 Policy Barriers in Graphene Industry

3.1.2 Technical Barriers of Graphene Industry

3.2 Competition Structure of Graphene Manufacturing Industry in China

3.2.1 Bargaining Ability of Upstream Raw Material Suppliers of Graphene

3.2.2 Bargaining Ability of Graphene Consumers

3.2.3 Internal Competition of Graphene Industry

3.2.4 Potential Entrants in Graphene Industry

3.2.5 Substitutes of Graphene

4 Analysis on Major Graphene Manufacturers in China, 2013-2016

4.1 Leaguer Stock Co., Ltd.

4.1.1 Enterprise Profile of Leaguer Stock

4.1.2 Graphene Business of Leaguer Stock Co., Ltd.

(The structures of 4.2-4.11 are similar to that of 4.1)

4.2 Shenzhen Beiterui New Energy Resources Material Co., Ltd.

4.3 The Sixth Element (Changzhou) Materials Technology Co., Ltd.

4.4 Qingdao Hua Gao Ink Polytron Technologies Inc

4.5 2D Carbon (Changzhou) Tech Co., Ltd.

4.6 Xiamen Knano Graphene Technology Corporation Limited

4.7 Beijing Graphene Holdings Co., Ltd.

4.8 Qingdao Haoxin New Energy Technology Co., Ltd.

4.9 Zhenjiang Browah Technology Co., Ltd.

4.10 Xiamen G-CVD Graphene Technology Co., Ltd.

4.11 Qitaihe Baotailong Graphene Material Co., Ltd.

5 Analysis on Costs of Raw Materials and Prices in China Graphene Industry, 2013-2016

5.1 Analysis on Production Costs of Graphene, 2013-2016

5.1.1 Structure of Major Production Costs

5.1.2 Factors Influencing Manufacturing Costs

5.2 Analysis on Graphene Prices in China, 2013-2016

5.2.1 Price Trend of Graphene, 2013-2016

5.2.2 Analysis on Factors Influencing Graphene Prices

6 Prediction on Development of Graphene Industry in China, 2017-2021

6.1 Factors Influencing the Development of Graphene Industry in China

6.1.1 Major Driving Forces and Market Opportunities in Graphene Industry in China

6.1.2 Risks and Challenges in Graphene Industry

6.2 Prediction on Supply in China Graphene Industry

6.2.1 Prediction on Output Volume of Graphene in China, 2016-2021

6.2.2 Prediction on Graphene Product Structure

6.3 Forecast on Demand for Graphene in China, 2016-2021

6.4 Prediction on China Graphene Conductive Additive Industry, 2017-2021

6.4.1 Prediction on New Energy Vehicle Industry in China

6.4.2 Prediction on China Graphene Conductive Additive Market

6.5 Anticorrosive Coating Market

6.5.1 Prediction on Anticorrosive Coating Market in China, 2017-2021

6.5.2 Forecast on Demand for Graphene in China Anticorrosive Coating Industry

6.6 Rubber and Plastic Market

6.6.1 Prediction on Rubber and Plastic Additive Market in China, 2017-2021

6.6.2 Forecast on Demand for Graphene in China Rubber and Plastic Industry, 2017-2021

6.7 Wearable Device Field

6.8 Graphene Pressure Touch Sensors

6.9 Graphene Electrode

6.10 Graphene Thermal Interface Materials

Selected Charts

Chart China’s GDP, 2011-2016

Chart Related Policies Concerning Graphene Industry Published by Chinese Government, 2013-2016

Chart Downstream Use of Graphene

Chart Industrialization Development Process of Graphene

Chart Preparation Technic Comparison of Graphene

Chart Patent Distribution of Graphene in Different Fields

Chart Graphene Industry Planning in Made in China 2025

Chart Major Application Fields of Graphene as Additive

Chart Output Volume and Prediction of New Energy Vehicles in China, 2014-2021

Chart Output Volume and Prediction of Anticorrosive Coatings in China, 2014-2021

Chart Forecast on the Market Size of China Wearable Devices, 2017-2021

Chart Major Graphene Manufacturers and Their Market Shares in China, 2013-2016

Chart Operation Status of The Sixth Element (Changzhou) Materials Technology Co., Ltd., 2013-2016

Chart Operation Status of Leaguer Stock Co., Ltd., 2013-2016

Chart Price Trend of Graphene in China, 2013-2016

Chart Forecast on Production Volume of Graphene in China, 2017-2021

Chart Forecast on Market Size of China Graphene, 2017-2021

The post Research Report on China Graphene Industry, 2017-2021 first appeared on CRI Report.

As economy develops and lifestyle changes, the demand for dairy products continually increases in China. In 2015, the output volume of dairy products was 27.825 million tons with an increase of 4.9% YOY, reversing the downturn momentum of output volume in 2014. In 2015, the output volume of dairy products in Hebei Province reached 3.46 million tons, accounting for 12.4% of the domestic one. Hebei Province possessed the highest output volume of dairy products in China. In 2015, the top 10 provinces of output volume were respectively Hebei, Inner Mongolia, Shandong, Henan, Heilongjiang, Shaanxi, Jiangsu, Sichuan, Hubei and Anhui. The output volume of top 3 provinces accounts for 32% of the national one. Up to the end of 2015, there were about 640 dairy product manufacturers in China with the sales revenue over CNY 330 billion.

In recent years, frequent and unsolved dairy product safety incidents in China made many consumers choose imported dairy products. In particular, parents of infants tend to purchase imported milk powder. From January to July in 2016, China imported 1,383,000 tons of dairy products with an increase of 29.1% YOY. The import value was USD 3.96 billion, increasing by 13.5% YOY.

In 2015, China imported 176,000 tons of infant formula milk powder, growing by 55,000 tons with an increase of 45% YOY compared to 121,000 tons in 2014. The import value of infant formula milk powder was USD 2.47 billion with an increase of 59.5% YOY. Holland, Ireland, France and New Zealand mainly export their infant formula milk powder to China.

In retail markets, many Chinese purchase imported milk powder. The domestic raw milk serving as the raw material of China dairy industry is twice the price of the imported one. The costs of various dairy products in use of domestic raw milk are obviously higher than those of imported products. Therefore, some Chinese dairy product manufacturers lower their production costs and enhance competitiveness through overseas acquisitions.

From 2013 on, there are 4 pieces of investment over CNY 1 billion in foreign countries by Chinese dairy product manufacturers. For example, in 2013, Yili invested CNY 3.2 billion to build a production base in New Zealand. Yashili spent CNY 1.1 billion in the construction of dairy product base. In 2014, Bright Dairy & Food Co., Ltd. purchased 56% stock right of Tnuva, the largest dairy enterprise in Israel with CNY 15.3 billion. In 2015, BIOSTIME spent CNY 6.3 billion to purchase 83% stock right of Swisse in Australia.

According to CRI, China’s per capita consumption of dairy products in 2015 was only about one third of the world average level, and there was still room for growth. As Chinese economy develops and residential income increases, demand for dairy products as well as imported dairy products in Chinese market will keep increasing. There will be many opportunities in Chinese market for global dairy manufacturers.

Through this report, readers can acquire the following information:

-Development Environment of China Dairy Industry

-Food Safety Incidents of China Dairy Industry in Recent Years

-Supply and Demand of China Dairy Products

-Market Competition of Dairy Industry

-Import and Export of Dairy Products in China

-Major Dairy Product Manufacturers in China and Their Operation Status

-Overseas Mergers and Acquisitions of China Dairy Manufacturers

-Major Driving Forces and Market Opportunities in China Dairy Industry

-Threats and Challenges Faced by China Dairy Industry

Prediction on Market Size of China Dairy Industry, 2017-2021

Table of Contents

1 Basic Concepts of China Dairy Industry

1.1 Definition and Classification of Dairy products

1.1.1 Definition

1.1.2 Classification

1.2 Analysis on Dairy Industry Chain

1.2.1 Raw Materials of Dairy Products

1.2.2 Downstream Clients of Dairy Products

1.3 Research Methods of the Report

1.3.1 Parameters and Assumptions

1.3.2 Data Sources

1.4 About CRI

2 Analysis on Development Environment of China Dairy Industry, 2011-2016

2.1 Economic Environment Faced by Dairy Industry

2.1.1 Chinese Economy

2.1.2 Global Economy

2.2 Policy Environment Faced by Dairy Industry

2.2.1 Policies of China Dairy Industry

2.2.2 Food Safety Policies

2.2.3 Development Trend of Policies

2.3 Social Environment of Dairy Industry in China

2.3.1 Summary of Social Environment and Consumer Concept in China

2.3.2 Safety Incidents in China Dairy industry

2.4 Overseas Mergers and Acquisitions of China Dairy Manufacturers

3 Operation Status of China Dairy Industry, 2011-2016

3.1 Supply of Dairy Products

3.1.1 Production Status of Dairy Products in China

3.1.2 Supply Structure of Dairy Products in China

3.2 Demand for Dairy Products

3.2.1 Market Size of China Dairy Industry

3.2.2 Demand Structure of Dairy Products in China

3.3 Price Trend of Raw Materials and Products in China Dairy Industry, 2013-2016

3.3.1 Price Trend of Raw Milk in China, 2013-2016

3.3.2 Price Trend of Dairy Products in China, 2013-2016

4 Analysis on Competition in China Dairy Industry, 2011-2016

4.1 Barriers to Entry in Dairy Industry

4.1.1 Policy Barriers

4.1.2. Capital Barriers

4.1.3 Brand Barriers

4.1.4 Sales Channel Barriers

4.2 Competition Structure of China Dairy Industry

4.2.1 Bargaining Ability of Raw Milk Suppliers

4.2.2 Competition of the Bargaining Ability of Dairy Product Consumers

4.2.3 Competition in China Dairy Industry

4.2.4 Threats from New Entrants of Dairy Industry

4.2.5 Substitutes of Dairy Products

5 Analysis on Sub-industries of China Dairy Industry, 2011-2016

5.1 Introduction of Sub-industries in China Dairy Industry

5.2 China Liquid Milk Industry

5.2.1 Analysis on Supply of Liquid Milk in China

5.2.2 Analysis on Demand for Liquid Milk in China

5.2.3 Analysis on Price of Liquid Milk

5.2.4 Market Competition of Liquid Milk

5.3 Adult Milk Powder and Infant Milk Powder

5.3.1 Supply of Adult Milk Powder and Infant Milk Powder

5.3.2 Demand for Adult Milk Powder and Infant Milk Powder

5.3.3 Competition between Domestic Milk Powder and Imported Milk Powder

5.4 Analysis on Other Dairy Products in China

5.4.1 Market Overview of Other Dairy Products

5.4.2 Analysis on the Price of Other Dairy Products

6 Analysis on Import and Export of Dairy Products in China, 2011-2016

6.1 Analysis on Import of Dairy Products in China, 2011-2016

6.1.1 Import Overview of Dairy Products in China

6.1.2 Structure of Imported Dairy Products in China

6.1.3 Major Import Origins of Dairy Products in China

6.1.4 Import Trend of Dairy Products in China, 2011-2016

6.2 Analysis on Export of Dairy Products in China

6.2.1 Export Overview of Dairy Products in China

6.2.2 Major Export Destinations of Chinese Dairy Products

6.3 Analysis on the Behavior of Chinese Consumers Purchasing Overseas Dairy Products

6.3.1 Analysis on the Value of Chinese Consumers Purchasing Overseas Dairy Products

6.3.2 Analysis on the Trend of Chinese Consumers Purchasing Overseas Dairy Products

7 Introduction of Key Enterprises in China Dairy Industry, 2013- 2016

7.1 China Mengniu Dairy Company Limited

7.1.1 Enterprise Profile of Monmilk

7.1.2 Operation Status of Monmilk

7.2 Inner Mongolia Yili Industrial Group Company Limited

7.3 Bright Dairy & Food Co., Ltd.

7.4 Wandashan Dairy Co., Ltd.

7.5 China Huishan Dairy Holdings Company Limited

7.6 Shuangcheng Nestle Co., Ltd.

7.7 Yashili International Holdings Ltd.

7.8 Beijing Sanyuan Foods Co., Ltd.

7.9 Analysis on Major Infant Milk Powder Manufacturers in China

8 Prospect of China Dairy Industry, 2017-2021

8.1 Analysis on Factors Influencing the Development of China Dairy Industry, 2017-2021

8.1.1 Major Driving Forces and Market Opportunities in China Dairy Industry

8.1.2 Risks and Challenges Faced by China Dairy Industry

8.2 Prediction on Supply of China Dairy Industry, 2017-2021

8.2.1 Prediction on Output Volume of China Dairy Industry

8.2.2 Prediction on Output Volume of Major China Dairy Sub-industries

8.3 Prediction on Demand of China Dairy Industry, 2017-2021

8.3.1 Prediction on Market Size of China Dairy Industry, 2017-2021

8.3.2 Prediction on Market Size of China Dairy Sub-industries, 2017-2021

8.4 Advice on Investment and Development of China Dairy Industry, 2017-2021

Selected Charts

Chart Disposable Income Per Capita in China, 2011-2016

Chart Proportion of Output Value of China Dairy Industry in GDP, 2011-2016

Chart Quantity of Dairy Enterprises in China, 2011-2016

Chart Summary of Policies Concerning China Dairy Industry in Recent Years

Chart Part of Safety Incidents in China Dairy Industry, 2011-2016

Chart Output Volume of Dairy Products in China, 2011-2016

Chart Output Volume of Liquid Milk in China, 2011-2016

Chart Output Volume of Milk Powder in China, 2011-2016

Chart Sales Revenue of China Dairy Industry, 2011-2016

Chart Market Size of Infant Milk Powder in China, 2011-2016

Chart Constitution of Imported Dairy Products in China, 2016

Chart Major Import Origins and Import Volume of Dairy Products in China, 2016

Chart Import Volume and Value of Dairy Products in China, 2011-2016

Chart Operation Status of Monmilk, 2011-2016

Chart Output Volume of Monmilk Dairy Products, 2011-2016

Chart Forecast on Output Volume of Dairy Products in China, 2017-2021

Chart Forecast on Market Size of China Dairy Products, 2017-2021

The post Research Report on China Dairy Industry, 2017-2021 first appeared on CRI Report.

China is a world leading ceramic producer accounting for 50% to 70% of the total production volume in terms of ceramics for daily use, display art and building.

China is a big ceramic producer with the largest output volume in the world, but it is not a powerful ceramic country. Chinese products are mainly middle and low-end ceramics whose prices are relatively low in international market. The price of products with the same type is only a fraction of that from powerful ceramic countries such as Italy and Spain.

Global Medical Ceramics Market-forecast till 2027

In recent years, the overcapacity leads to the price war among enterprises and declining profit level in the ceramic industry accordingly. Ceramic enterprises are poor in innovation ability with high product homogeneity, leading to weak international competitiveness.

The expanding production capacity of ceramic manufacturers leads to serious overcapacity and imbalance between supply and demand. In addition, it also results in pollution and short of raw material resources.

In 2015, new environment friendly laws and standards were approved and executed so entry barriers became higher in the ceramic industry. Therefore, enterprises increased the investment in environment protection facilities while some backward enterprises were phased out or conducted mergers and acquisitions. Chinese government energetically promoted the natural gas as production energies of ceramic enterprises for pollution reduction.

There are Guangdong Foshan building ceramic production bases, Guangdong Chaozhou daily, artistic and sanitary ceramic production bases, Shandong Zibo daily ceramic production bases and Jiangxi Jingdezhen artistic ceramic production bases in China.

The development of the whole industry is characterized with regionalization and aggregation. Many enterprises intensified the efforts on R&D, innovation and product upgrading and updating to adapt to new market demand and changes. Meanwhile, more enterprises started to improve their productivity, automation, marketing network and marketing strategies.

The output volume of ceramic tiles was 10.18 billion m² declining by 0.5% YOY and that of sanitary wares exceeded 218 million increasing by 1.58% in China in 2015. Meanwhile, the export value of various building ceramics and sanitary ware products exceeded USD 21.1 billion increasing by 9.25% YOY.

The export volume of ceramic products was 25.26 million tons with an export value of CNY 162.66 billion in China in 2015. At present, the export value of ceramic products increased yearly.

Ceramic Tiles Market in India (2018-2023)

On the one hand, the export volume of ceramics increased continuously with an increasing average unit price of ceramics. In recent years, the construction industry developed rapidly in Middle East areas. For example, Saudi Arabia invested USD 350 billion in the construction of large-scale projects as the largest project contracting market in Middle East area.

In addition, import policies are relatively loose in Middle East area. For example, no other taxes exist apart from 5% of the import duty in United Arab Emirates. Therefore, some Chinese ceramic enterprises possess market opportunities such as the export value of CNY 270 million increasing by 20.4% YOY of ceramic products in Jingdezhen in 2015.

On the other hand, various problems exist for ceramic exporters such as trade barriers and anti-dumping investigations in China. For example, Egypt General Administration of Standard and Quality Management issued new standard reporting on ceramic tiles requiring the implementation of Egypt standards on imported ceramic tile products in 2015.

India investigation institutions officially initiated anti-dumping investigation against China, during which period the total export value of involved ceramics from China to India was USD 210 million in 2015.

Brazil released the final decision on the ceramic anti-dumping against China and imposed an anti-dumping duty of 3.34 USD/m² to 6.42 USD/ m² for 5 years on enterprises without price undertakings, leading to the declining export value of ceramic tiles from China to Brazil.

In some ceramic product fields, the high-end market in China is occupied by European countries such as Italy and Spain with advanced production technologies and design. The annual import value of ceramic tiles increased from USD 50 million in 2009 to about USD 100 million in 2015 while it was far below the export value.

The export value of ceramic products is expected to grow further with the price advantages of Chinese ceramics in the international market in the next few years.

Through this report, the readers can acquire the following information:

-Development Environment of Ceramic Industry in China

-Supply and Demand in China Ceramic Manufacturing Industry

-Development Status of China Ceramic Sub-industries

-Import and Export Status of Ceramic Products in China

-Operation Status of Key Enterprises in China Ceramic Industry

-Market Competition of China Ceramic Industry

-Major Driving Forces and Market Opportunities in China Ceramic Industry

-Risks and Challenges in China Ceramic Industry

-Forecast on Development of China Ceramic Industry

The post Research Report on China Ceramic Industry, 2017-2021 first appeared on CRI Report.

Gourmet powder is a kind of condiment and mainly made of glutamic acid. It is mainly used to  enhance the flavor of food and is widely used in soup and sauces in East Asian cuisine.

Gourmet powder is produced by fermented method. This industry is a kind of processing industry using starch and molasses as major raw materials.

With the stable development of Chinese economy, people’s living conditions are improving. Individual consumers eat out and purchase processed food more frequently. The rapid development of catering and food processing industry stimulates the consumption of industrial and catering gourmet powder. Meanwhile, as consumers pay more attention to flavors of food products, the consumption of household gourmet powder increases.

In recent years, substitution effect of condiments rises following the intensifying trend of consumption upgrading, leading to decreased demand for gourmet powder in catering industry and households. Meanwhile, condiments, such as soy sauce and chicken essence, increase rapidly, leading to a rising demand for gourmet powder in food processing industry. Overall, the demand for gourmet powder keeps stable. According to CRI market research, from 2011 to 2016, the annual demand remained over 2 million tons in China’s gourmet powder industry.

Gourmet powder industry has undergone three rounds of restructurings. Entry barriers get higher due to government policies. Its annual growth rate remains stable, leading to fierce industrial competition and a oligopoly structure. CRI market research shows that Fufeng Group, Meihua Biological Technology Group Co., Ltd., Ningxia EPPEN Biotech Co., Ltd., Lotus Health Industry Holding Group Company and Shandong Shenghua Group took up more than 80% of the total annual output volume of gourmet powder in China in 2016.

China is the largest producer of gourmet powder in the world. Most condiments contain gourmet powder. With the increasing export of Chinese condiment and fermentation products, the demand for gourmet powder will also increase. Notice on Adjusting the Export Tax Refund Rates of Certain Products was issued by China’s Ministry of Finance in 2014, which regulated to increase export rebates of some high added-value products, processed products of corns, textiles and garments. The export rebate of gourmet powder increased from 0 to 13%, which was implemented on January 1, 2015 and promoted the import of gourmet powder in China.

Corns and coals occupy the largest portion of the total cost in gourmet powder manufacturing in China. Generally speaking, the price of corns is steady while that of coals fluctuates much due to factors of economic cycles and market speculation. In addition, gourmet powder manufacturing industry faces increasing costs of environment protection and labor. Generally speaking, the production costs and price of gourmet powder both present an upward trend in China.

The downstream industries of gourmet powder are concentrated in food processing industry, catering industry and household consumption. The proportions are respectively around 5:3:2. In recent years, because of the rising resident income, the consumption upgrading and also the nationwide saga about gourmet powder  harmful to human health, the demand from catering industry and households for gourmet powder decreases, while the demand for soy sauce and chicken essence increases. In fact, gourmet powder is also one of the main raw materials of soy sauce and other condiments. The development of other condiment industries and snack food industry in China increase the market demand for gourmet powder, enhancing the stable growth of gourmet powder industry.

Readers Can Obtain the Following Information or More Through This Report:

-Development Environment of Gourmet Powder in China

-Production and Demand Status of Gourmet Powder in China

-Competition in Gourmet Powder Market in China

-Import and Export Status of Gourmet Powder in China

-Top 5 Gourmet Powder Manufacturers in China

-Major Driving Forces and Market Opportunities in Gourmet Powder Industry in China, 2017-2021

-Threats and Challenges in Gourmet Powder Industry in China, 2017-2021

– Forecast on Supply and Demand of Gourmet Powder in China, 2017-2021

Table of Contents

1 Relevant Concepts of Gourmet Powder Manufacturing Industry

1.1 Definition and Classification of Gourmet Powder

1.1.1 Definition of Gourmet Powder

1.1.2 Classification of Gourmet Powder

1.1.2 Manufacturing Techniques of Gourmet Powder

1.2 Parameters and Assumptions

1.2.1 Assumption Basis

1.2.2 Data Sources

2 Analysis on Gourmet Powder Industry in China, 2017-2020

2.1 Development Environment of Gourmet Powder in China

2.1.1 Economic Environment

2.1.2 Policy Environment

2.1.3 Social Environment

2.2 Analysis on Gourmet Powder Supply in China, 2011-2015

2.3 Analysis on Demand for Gourmet Powder in China

2.3.1 Major Consumer Group of Gourmet Powder in China

2.3.2 Market Size of Gourmet Powder, 2011-2015

2.4 Analysis on Import and Export of Gourmet Powder in China, 2014-2016

2.4.1 Export Overview

2.4.2 Import Overview

3 Competition Status of Gourmet Powder Manufacturing Industry in China, 2013-2016

3.1 Barriers to Entry in Gourmet Powder Industry in China

3.1.1 Policy Barrier

3.1.2 Capital Barrier

3.1.3 Brand Barrier

3.2 Competition Structure of Gourmet Powder Manufacturing Industry in China

3.2.1 Bargaining Ability of Raw Material Suppliers of Gourmet Powder

3.2.2 Bargaining Ability of Gourmet Powder Consumers

3.2.3 Internal Competition of Gourmet Powder Industry

3.2.4 Potential Entrants of Gourmet Powder Industry

3.2.5 Substitutes for Gourmet Powder

4 Analysis on Top 5 Gourmet Powder Manufacturers in China, 2014-2016

4.1 Fufeng Group Co., Ltd.

4.1.1 Enterprise Profile of Fufeng Group

4.1.2 Sales Revenue and Market Share of Fufeng Group

4.2 Meihua Biological Technology Group Co., Ltd.

4.2.1 Enterprise Profile of Meihua Biological Technology Group Co., Ltd.

4.2.2 Sales Revenue and Market Share of Meihua Biological Technology Group Co., Ltd.

4.3 Ningxia EPPEN Biotech Co., Ltd.

4.3.1 Enterprise Profile of Ningxia EPPEN Biotech Co., Ltd.

4.3.2 Sales Revenue and Market Share of Ningxia EPPEN Biotech Co., Ltd.

4.4 Lotus Health Industry Holding Group Company

4.5 Shandong Shenghua Group Co., Ltd.

5 Analysis on Raw Material Costs and Retail Prices in Gourmet Powder Manufacturing Industry in China, 2013-2016

5.1 Analysis on Manufacturing Costs of Gourmet Powder in China, 2013-2016

5.2 Analysis on Gourmet Powder Prices in China, 2013- 2016

6 Forecast on Development of Gourmet Powder Industry in China, 2017-2021

6.1 Factors Influencing Development of Gourmet Powder Industry in China

6.1.1 Major Driving Forces and Market Opportunities in Gourmet Powder Industry in China

6.1.2 Threats and Challenges in Gourmet Powder Industry in China

6.2 Forecast on Supply of Gourmet Powder Industry in China, 2017-2021

6.2.1 Forecast on Output Volume of Gourmet Powder in China, 2017-2021

6.2.2 Prediction on Product Structure

6.3 Forecast on Demand for Gourmet Powder in China, 2017-2021

Selected Charts

Chart GDP and National Disposable Income Per Capita in China, 2011-2020

Chart Total Retail Sales of Consumer Goods in China, 2011-2016

Chart Disposable Income and Consumption Expenditure Per Capita in China

Chart Revenue and Growth Rate of Catering Industry in China, 2011- 2016

Chart Manufactured Goods and Growth Rate of Agriculture and Agri-food Processing Industry in China

Chart Output Volume of Gourmet Powder in China, 2011- 2016

Chart Sales Revenue of Gourmet Powder Manufacturing Industry in China, 2011-2016

Chart Major Export Destinations for Gourmet Powder in China, 2016

Chart Export Status of Gourmet Powder Industry in China, 2014-2016

Chart Top 5 Gourmet Powder Manufacturers and Their Market Shares in China, 2016

Chart Sales Revenue of Gourmet Powder of Fufeng Group, 2011-2016

Chart Market Share of Gourmet Powder of Fufeng Group in China, 2013-2016

Chart Sales Revenue of Gourmet Powder and Glutamic Acid of Meihua Biological Technology Group Co., Ltd., 2013- 2016

Chart Output Volume of Gourmet Powder of Meihua Biological Technology Group Co., Ltd., 2013- 2016

Chart Sales Revenue of Gourmet Powder of Ningxia EPPEN Biotech Co., Ltd., 2013-2016

Chart Output Volume of Gourmet Powder of Ningxia EPPEN Biotech Co., Ltd., 2013-2016

Chart Sales Revenue of Gourmet Powder of Lotus Health Industry Holding Group Company, 2013-2016

Chart Output Volume and Market Share of Gourmet Powder of Lotus Health Industry Holding Group Company, 2013-2016

Chart Price Trend of Coal in China, 2013-2016

Chart Price Trend of Corn in China, 2013-2016

Chart Production and Export Status of Condiment and Fermented Products, 2011-2015

Chart Forecast on Production Volume of Gourmet Powder in China, 2017-2021

Chart Forecast on Market Size of Gourmet Powder in China, 2017-2021

The post Overview of Gourmet Powder Industry in China, 2017-2021 first appeared on CRI Report.